15NB Table D & E AS2129 Full Face Gasket, 3mm Red Silicone Rubber

SKU: SWM000132P03V0001
Availability: Cut to Order, Ships in 2-3 W/Days.
$4.98
INC. GST
$4.53
EX. GST

BULK DISCOUNT RATES

All Bulk Prices Below Are Quoted Including GST.
Buy 1 - 9 and pay only $4.98 each
Buy 10 - 25 and pay only $3.24 each
Buy 26 - 50 and pay only $2.58 each
Buy 51 - 99 and pay only $2.33 each
Buy 100 or above and pay only $2.13 each
  • High temperature resistant gaskets for AS 2129 flanges.
  • Suitable for use with potable water.
  • Made from industrial-grade silicone rubber.
  • Cut to size in our Australian facilities to suit the precise requirements of AS 2129.

Silicone Rubber Gaskets are a popular choice for sealing flanges in applications with elevated temperatures.

This page lists our range of 3mm thick Red Silicone Gaskets to suit AS 2129 flanges in the Full Face configuration. They are quality rubber gaskets, cut to size in Australia, with a maximum operating temperature of 260°C and a range of other performance benefits.

The sections below cover the available sizes, performance capabilities of this material and more.

Sealing Capabilities of Red Silicone Rubber Gaskets.

Our Red Silicone Rubber is a premium-quality, industrial grade Silicone Rubber Sheet with excellent sealing properties. This rubber has excellent temperature resistance, very good electrical insulation properties and wide-ranging chemical resistance. These, and other properties, are expanded on more below:

Food Grade and Potable Water Approved.

Washers, gaskets and seals cut from our Red Silicone Rubber inherit this materials food and potable water certification. Red Silicone Rubber Gaskets from Swift are made from food grade rubber which allow them to be used in sealing equipment that will have direct contact with food (as per FDA and EU standards) and for sealing potable (drinking) water (as per WRAS).

This rubber also carries certifications for several other applications which are detailed more on the attached technical data and over on the specifications tab.

Excellent Heat and Cold Temperature Resistance.

Seals made from our Red Silicone Rubber will withstand ongoing exposure to temperatures between -60°C and +230°C as well as short-term spikes to 250°C.

This is important as most other rubbers (Viton/FKM is the other exception) simply will become brittle and crack well before -50°C and will exhibit serious degradation before 160°C. Silicone doesn't and maintains excellent flexibility and sealing performance. An important attribute for high or low temperature seals.

Excellent Sealing Characteristics.

Silicone Gaskets are often selected because of this rubber excellent sealing performance. All the gaskets featured on this page are made from 60 Shore A Durometer Rubber sheet and have excellent compression, recovery and mechanical strength.

This results in flange gaskets which are very long lasting and offer reliable sealing performance.

Flange Gaskets to Suit AS2129 Sizing Info.

The gaskets featured on this page are the full-face style of rubber flange gasket. These gaskets take up the full face of the flange, with holes cut for the bolts. Both ring and full-face gaskets can be used on these flanges depending on particular requirements and user preferences.

AS 2129 Flanges are most commonly found in either AS 2129 Table D or AS 2129 Table E which is why gaskets for both are listed here. That said, there are quite a few other tables made and gaskets for these (e.g. Table A, C, F, H) can also be produced upon request.

Why are some Table D and Table E Gaskets the same size while others aren’t?

The AS 2129 Flange Specification is like many others (e.g. ANSI 150) in that many of the smaller sized flanges (and consequently, gaskets) are the same across tables. In the AS 2129 Spec, gaskets made to suit flanges with a nominal bore of up to 80NB are the same no matter if the flanges are listed as Table D or Table E. After this, sizes do differ.

The table below provides more specifics on this.

Full Face Flange Gaskets to suit AS 2129 Table D and Table E Size Info Tables.

AS 2129 Table D Gaskets Sizing.

All Dimensions below are given in millimeters (mm).

Flange Nominal
Bore
Gasket OD Gasket ID Number of
Holes
Hole
Diameter
PCD Matches
Table
15NB 95 17 4 14 67 E
20NB 100 22 4 14 73 E
25NB 115 25 4 14 83 E
32NB 120 32 4 14 87 E
40NB 135 40 4 14 98 E
50NB 150 50 4 18 114 E
65NB 165 68 4 18 127 E
80NB 185 82 4 18 146 E
90NB 205 90 4 18 165 -
100NB 215 100 4 18 178 -
125NB 255 125 8 18 210 E
150NB 280 150 8 18 235 -
200NB 335 200 8 18 292 -
250NB 405 250 8 22 356 -
300NB 455 300 12 22 406 -
350NB 525 350 12 26 470 E
400NB 580 400 12 26 521 E
450NB 640 450 12 26 584 -
500NB 705 500 16 26 641 E
600NB 825 600 16 30 756 -

AS 2129 Table E Gaskets Sizing.

All Dimensions below are given in millimeters (mm).

Flange Nominal
Bore
Gasket OD Gasket ID Number of
Holes
Hole
Diameter
PCD Matches
Table
15NB 95 17 4 14 67 D
20NB 100 22 4 14 73 D
25NB 115 25 4 14 83 D
32NB 120 32 4 14 87 D
40NB 135 40 4 14 98 D
50NB 150 50 4 18 114 D
65NB 165 68 4 18 127 D
80NB 185 82 4 18 146 D
90NB 205 90 8 18 165 -
100NB 215 100 8 18 178 -
125NB 255 125 8 18 210 D
150NB 280 150 8 22 235 -
200NB 335 200 8 22 292 -
250NB 405 250 12 22 356 -
300NB 455 300 12 26 406 -
350NB 525 350 12 26 470 D
400NB 580 400 12 26 521 D
450NB 640 450 12 26 584 -
500NB 705 500 16 26 641 D
600NB 825 600 16 33 756 -
Colour Red
Insertion None
Hardness (ASTM D2240) 60 Shore A (+/- 5) Durometer
Continuous Operating Temperature -60°C to +230°C
Short-Term Operating Temperature 250°C
Brittle Point -80°C
Elongation at Break (ASTM D412) 340%
Tear Strength (ASTM D624) 14.2 N / mm
Tensile Strength (ASTM D412) 1146 PSI
Potable Water WRAS Approved for Potable Water
at Temperatures up to 85°C
FDA Compliant As Per 21 CFR 177.2600
(Suitable for Direct Food Contact)
EC Food Safe Compliant with EC 1935/2004 
(Suitable for Direct Food Contact)
RoHS and REACh Both Fully Compliant
FMVSS 302 Meets Part 571 Flammability Test
SKU SWM000132P03-3.0
Brand Gaskaseal