AllPax Gasket Cutter System - Medium Duty - 1-49" - AX4040

SKU: SWM000224B01V0001
Availability: Available for Fast Dispatch.


All Bulk Prices Below Are Quoted Including GST.
Buy 2 or above and pay only $653.36 each
  • Extension style gasket cutter for cutting round gaskets.
  • Made in the USA using high quality materials for long lasting performance.
  • Works with a variety of materials including cork, rubber, fibre, sponge and more.
  • Aluminium Cutting Block, Steel-Extension Bars, Standard and Heavy-Duty Blades and dual Metric / Imperial Cutting Indicator.

Allpax Gasket Cutter Kits are known for their high quality, ease of use and longevity. Our Medium Duty Gasket Cutters are ideal for situations where they will be used for cutting a range of materials on a fairly regular basis.

These kits offer a good combination of resilience, toughness and versatility while being a little more economical than the heavy-duty variants. They’re used by all kinds of industries around the world for their ease, reliability and long-lasting performance. Some of their features include:

Everything You Need to Cut Ring Gaskets.

Each AllPax Medium Duty Gasket Cutter features:

  • An Aluminium Cutter Block.
  • Standard and Heavy Duty Cutting Blades.
  • Plated Steel Extension Bars.
  • A Plastic Storage Case.
  • An 450mm² (18”) Cutting Board.
  • More (see the table below).

The Ability to Cut Most Kinds of Gasket Materials.

These ring gasket cutters are made in the USA and are trusted around the world for their consistent, reliable performance. They are fast and simple to setup and very easy to operate. They are also quite versatile and can be used to effectively cut a variety of gasket and sealing materials including:

  • Cork Gasket Sheet.
  • Rubber Sheet (both straight rubber and reinforced grades).
  • Engineering and Industrial Felts.
  • Compressed Non-Asbestos Fibre (CNAF) Gasket Materials.
  • Graphite Gasket Sheet (except those with steel reinforcement).
  • Soft PTFE and Plastic Sealing Sheet.

Each model in this range comes with both standard duty and heavy duty cutting blades. The standard duty blades are great for rubber, sponge and corks. The heavy duty blades are what we use if we need to cut compressed non-asbestos fibre materials (such as Alapin, Topgraph or Conafi) out on site.

The one major exception is steel reinforced gasket materials like tanged graphite. Because of this reinforcement, cutting these with an extension style cutter is not suggested.

Cut Gaskets in a Large Range of Sizes.

The whole concept of a gasket cutter is based on having the tools needed to product the gasket required, when it’s required. For that to work, you need a gasket cutter that can produce a wealth of different sized gaskets. Medium Duty AllPax Gasket Cutting Tools fit this description.

Each model in the range comes with a number of extension arms to allow you to produce different sizes of gasket. These are listed below:

A Style of Gasket Cutter to Suit Every Need.

To suit the needs of different users, Allpax has developed a range of different styles that fit under the Medium Duty Gasket Cutter banner. A breakdown of these is included in the table below.

Part # AX4000 AX4010 AX4020 AX4030 AX4040
Minimum Gasket / Washer
Internal Diameter (ID)
Maximum Gasket 
Outside Diameter (OD)
Aluminium Cutter Block 1 1 1 1 1
Standard Blades 1 1 1 1 1
Heavy-Duty Blades 1 1 1 1 1
Short Centre Pin 1 1 1 1 1
Medium Centre Pin 1 1 1 1 1
Long Centre Pin 1 1 1 1 1
Disc Pin 0 0 0 0 0
Pivot Post Assembly 1 1 1 1 1
Piercing Tool 1 1 1 1 1
Extension Arm 0 0 1 2 3
Cutting Board - 450mm² / 18"
(2 x Centre Pin Reffules Installed)
0 1 1 1 1
Storage Case 1 1 1 1 1
Detailed Instructions 1 1 1 1 1


SKU SWM000224B01
Brand Allpax

Related Content & Information.

AllPax Gasket Cutter Instructions Link        
Allpax Medium Duty
Gasket Cutter Instructions