Heat Shrink and Electrical Sleevings
We’re pleased to be able to offer a wide selection of heatshrink and non-shrinking insulation tubing and sleeving for cable protection, insulation, terminating and joining. We stock a huge range of sizes and offer each in the smallest minimum quantities possible so that you can get just what you need for your job.
Our Dual Wall Heat Shrink Kit is ideal for those working with cables in the auto, electronics, marine or telecommunications areas. This kit contains 3 sizes in both red & black for sealing, insulating and colour coding cable joins and terminations.
Available in 2-way, 3-way or 4-way styles in a selection of different sizes our Heat Shrink Cable Breakout Boots are ideal for sealing, protecting and insulating cable transitions and splice points.
For protecting and sealing the ends of cables while they’re not in use, our Heat Shrink End Caps are all supplied with a thick layer of hot melt adhesive for a good, lasting seal. Available in 12 sizes to suit cables (and ropes) between 2mm Ø and 158mm Ø.
Ideal for those who go through a bit of heat shrink but don’t want to commit to a full industrial sized roll. These handy sized packs vary in length depending on the size of heat shrink and are available for a wide range of sleeving sizes and colours.
Economical 1200mm long individual lengths of heat shrink tube are available in a huge range of sleeving sizes and colours. Thin wall heat shrink has a 2:1 shrink ratio, is very flexible and easy to install.
Containing 130 total pieces made up from 5 different colours and 6 different sizes, our Heat Shrink Kit is a must-have for workshops, garages and boats. Made from industrial-grade heat shrink, it’s ideal to keep on-hand.
Vidaflex 111 Heat Resistant Sleeving is made from fibreglass with a silicone resin coating. It has very good electrical properties, handles temperatures up to 260°C and is ideal for insulating and protecting cables and wires.
Available in 3 distinct colours, Vidaflex 942 is a high quality electrical insulation sleeving used to insulate, protect or identify cables and leads. It is available in handy 10 Metre packs in a selection of diameters.
A high voltage, high temperature electrical insulation sleeving made from fibreglass with a flexible silicone rubber outer layer. Vidaflex SD500 Sleeving is available in a selection of bore sizes.