Silglaze N10 Neutral Cure Silicone Aluminium 300gm Cartridge

Ships in 2-3 Days

All Prices Include GST.

In Stock

Buy In Bulk & Save!
Buy 5 to 19: Pay $6.90
Buy 20 to 59: Pay $6.65
Buy 60 or more: Pay $6.50

Orders Over $100 are Shipped Free within Australia

Delivery via Courier - Australia Wide - $9.90
Fast Delivery via Courier. We use Toll Priority (Air Freight) when possible or a combination of Star Track, Couriers Please, TNT and others depending on the size and classification of the item.

  • Neutral cure on part silicone adhesive sealant
  • Low odour
  • Excellent long term adhesion and flexibility


Silicone N10 Neutral Cure Silicone Adhesive Sealant is a 1 part general purpose silicone designed for glazing and sealing applications that require long term reliability. This silicone is weathering and UV resistant and is not adversely affected by fluctuations between high and low temperatures. N10 Neutral Cure Silicone is non-slump and withstands temperatures between -62°C and 180°C.

N10 Neutral Cure Silicone adheres well to ceramics, aluminium, GRP, granite, concrete, glass, galvanised steel and many plastics. Once cured it will tolerate dynamic joint movement of up to 25%.

Applications for N10 Neutral Cure SIlicone

  • Glazing of frames and panels
  • Sealing of joints and gaps 
  • Bonding and sealing sheet metal
  • Sealing around skylights and ventilation ports
  • Sealing and bonding air conditioning ducting
  • Assembly of plastic and metal signs
  • Weather proofing and general glazing applications
  • Sealing and weatherproofing the joins of ColorBond sheets


Can I paint it once it's dry?

No. Paint will not stick to N10 Silicone. 

How long have I got to use it once I cut the top?

About 5 minutes. Curing will begin once N10 Neutral Care Silicone is exposed to the moisture in the air and, since it has a skin over time of approximately 5 minutes (at 25°C and 50% relative humidity), this is about how long you have before issues arise. Please do note, this time will be reduced if working in higher humidity and/or higher temperatures. It will be extended if working in colder / lower humidity areas.

What’s the best way to remove bits that I applied by mistake?

If you get to them before the silicone has cured (not just skinned over but actually cured), you’ll be able to remove them with mineral turpentine (though care should be taken not to damage the underlying surface if it is a little sensitive). If the silicone has cured, our Weicon Gasket Remover is a good option. We’ve used it more than once to remove old silicone and it’s generally performed quite well.

Can I use this silicone with ColorBond® Steel?

Yes. Bluescope Steel (manufacturer’s of ColorBond) say that “Neutral Cure silicone rubber sealants are the only sealants recommended for use with COLORBOND® and ZINCALUME® steel.

More information on this can be found at

Colours: White, Translucent, Black, Light Grey, Dark Grey, Aluminium Grey, Off White, Brown

Basis: Oxime (1 Part Neutral Cure)

Continuous Temperature Resistance: -62°C to +180°C

Skin-Over Time: 5-10 Minutes

Cure Speed: 5-7 Days for a 10mm Bead at 25°C and 50% Relative Humidity

Shore Hardness: 28 Shore A

Food Grade: No

Potable Water: No

Maximum Depth: 10mm

Maximum Width: 25mm

SKU SWP000093

Be The First To Review This Product!

Help other Swift Supplies Online Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

You May Also Like

Others Also Bought

More From This Category