Weicon VA 8312 Industrial Strength Super Glue 12gm
All Prices Include GST.
- High strength super glue for plastic and rubber.
- Fast curing and low viscosity.
- ISEGA approved for use as an adhesive in food technologies.
Weicon VA 8312 Industrial Super Glue is a high strength grade of super glue with close to instant adhesion. It is a semi-transparent super glue designed for bonding plastic and rubbers, though it can definitely adhere to other surfaces and materials. It has been tested and approved by ISEGA as an adhesive for use with food technologies and is made in Germany.
VA 8312 Cyanoacrylate Adhesive has a low viscosity which allows it to run. Once cured, it’ll handle temperatures between -50°C and +80°C while also tolerating short term spikes up to 100°C.
Applications for VA 8312 Super Glue
- Bonding plastic components and surfaces
- Bonding rubber seals and fittings
- Fixing rubber or plastic bumpers
- Model making
- Bonding in and around food preparation areas
- Used in combination with Weicon Contact Filler to fill cracks, holes and cavities
Not sure if this is the best glue for you, we really reccomend checking out our Guide to Super Glues and the fantastic Weicon Adhesive Finder Tool which is also available as a free app for iOS and Android.
Will VA 8312 Super Glue work with Nylon?
Yes. VA 8312 bonds well to high surface energy plastics (like Nylon) so you can expect a good strong bond. Make sure you follow the advice on both the Technical Data Sheet (on the media tab) and the glue pen with respect to surface preparation (i.e. make sure it’s clean and dry).
How long do I have to hold the parts together for?
It depends a little on the conditions the glue is used in. Generally speaking, you’ll probably be fine with most materials after 30-60 seconds (at most); this time can vary. For example, if you’re using VA 8312 to bond neoprene rubber to PVC initial adhesion will be achieved in about 30 seconds if the environment you’re working in is around 23°C and 50% humidity. Warmer temperatures or higher humidity will speed this up.
Where should I keep the container if I don’t use it all at once?
Cyanoacrylates are best kept refrigerated (especially in Australia). The container lid must be on air tight before storing it in the fridge which will extend the usable life of the glue significantly.
|Colour||Colourless / Clear|
|Initial Adhesion on Nora Test Rubber||< 2-10 Seconds|
|Full Cure||24 Hours|
|Viscosity (20°C Brookfield)||20-40 MPa|
|Continuous Temperature Resistance||-50°C to +80°C|
|Short-Term Temperature Resistance||+100°C|
|Max. Gap Covering Power||0.1mm|
|Potable Water||ISEGA Recognised as an Adhesive for Food Technology|
|Food Applications||ISEGA Recognised as an Adhesive for Food Technology|
|Shear Strength Adhesion to Sand-Blasted Steel||20 N/mm² (DIN 53283)|
|Shear Strength Adhesion to Rigid PVC||13 N/mm² (DIN 53283)|
|Shear Strength Adhesion to ABS||12 N/mm² (DIN 53283)|
|Shear Strength Adhesion to NBR||>8 N/mm² (exceeds strength of rubber) (DIN 53283)|
|IMPA||81 52 41 (12gm Pen), 81 52 42 (30gm Pen),
81 52 43 (60gm Pen)
|ISSA||75.629.04 (12gm Pen), 75.629.05 (30gm Pen),
75.629.06 (60gm Pen)
|Plastic||Highly Compatible (High Surface Energy and Medium Surface Energy Plastics Only)|
|Glass / Ceramic||Not Compatible|
For more technical details, use guidance and product details please see the attached Technical Data Sheet (located on the Media tab for this glue).
Be The First To Review This Product!
Help other Swift Supplies Online Pty Ltd users shop smarter by writing reviews for products you have purchased.