A3300 Grey Double Sided Adhesive Tape 1.1mm Thick x 12mm Wide x 33 Metres

Ships in 2-3 Days

All Prices Include GST.

$77.25
In Stock

Width
Buy In Bulk & Save!
Buy 3 to 5: Pay $74.05
Buy 6 to 9: Pay $70.95
Buy 10 or more: Pay $68.35


Orders Over $100 are Shipped Free within Australia



Delivery via Courier - Australia Wide - $9.90
Fast Delivery via Courier. We use Toll Priority (Air Freight) when possible or a combination of Star Track, Couriers Please, TNT and others depending on the size and classification of the item.

Key Features

  • High tack enhanced adhesive for bonding to low surface energy materials
  • Grey acrylic foam backing absorbs joint movement to maintain adhesive performance
  • Easy release liner and fast adhesion for easy application

Description

A3300 Grey Double Sided Adhesive Tape is a high quality type of double sided adhesive foam tape that can be used with almost any surface or material. This tape is built with a grey, acrylic foam core that absorbs movement in the joint (like those caused by temperature shifts) which enables the adhesive bond to remain strong. On both sides of this core there’s an enhanced adhesive that bonds fast and with high strength to a wide range of substrates including low surface energy materials and plastics.

This double sided tape has excellent weathering characteristics and can be used indoors or outdoors. The unique adhesive system used here enables A3300 Grey Double Sided Adhesive Tape to provide not only fast initial tack and adhesive built but also high ultimate adhesion levels for long term performance. 

The acrylic foam core incorporates high stress relaxation and works to distribute stress across the entire bonding area. This means that, unlike mechanical fasteners that concentrate the joint stress in one location, A3300 Grey Double Sided Adhesive Tape will distribute it across the whole bonding area to put less stress on materials being fastened or mounted.

Each roll of A3300 Grey Double Sided Adhesive Tape is supplied with a light blue polyethylene liner that comes off easily and is strong enough not to tear as you’re removing it. Once installed, AA3300 will handle temperatures between -35°C and 90°C. It will also tolerate short-term spikes up to 150°C.

Applications

  • Bus, truck and trailer skin mounting and installation
  • Body side moulding
  • Mounting architectural composite panels
  • Installing aftermarket automotive trims
  • Mounting exterior building cladding
  • Sign installation
  • Craft and model making
  • Attaching decorative fasciae 
  • General decoration and the mounting of house numbers, signage and facades

(SWP000074)

What should I do to prepare the surface before I stick the tape?

Just make sure it is clean and free of any dust or loose particles (e.g. loose paint) that may get in the way of the tape bonding to the actual mounting surface. Cleaning agent selection depends largely on what the mounting surface is and how dirty/oily/contaminated it is.

Is there any limit to the temperatures this should be used in?

There is. When you’re first applying the tape try to do when the room temperature is at least 15°C. In fact, the warmer the better and heat increases the bond strength of the adhesive layers.

Once the tape is applied it will tolerate anything between -35°C and +90°C. It’ll also handle short-term spikes (of an hour or so) up to 150°C.

Are other colours available?

Not of this particular grade. We do have quite a selection of double sided tapes though and all are classified by colour. You can check them out here.

Colour: Grey

Continuous Operating Temperature: -35°C to +90°C

Short-Term Operating Temperature: 150°C

SKU SWP000074

Be The First To Review This Product!

Help other Swift Supplies Online Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


You May Also Like



Others Also Bought



More From This Category