Adhesive PVC Foam Tape 3.2mm Thick x 9mm Wide x 30.5 Metres Long

SKU: SWM000029P01V0002
Availability: Ships in 2-3 W/Days
$17.73
INC. GST
$15.96
EX. GST

BULK DISCOUNT RATES

All Bulk Prices Below Are Quoted Including GST.
Buy 3 - 4 and pay only $15.66 each
Buy 5 - 9 and pay only $14.75 each
Buy 10 or above and pay only $12.52 each
  • ​Low density grade which seals at just 30% compression.
  • UV resistant for indoor or outdoor use.
  • Acrylic adhesive allows for adhesion to a wide range of surfaces and materials.

The rolls of PVC Foam Sealing Tape shown on this page measure 3.2mm Thick x 30.5 Metres Long (available in various widths). We slit this tape to size ourselves so are very pleased to offer it in a variety of other widths & thicknesses. You can browse our online range via the links at the bottom of this page or, alternatively, don't hesitate to contact us to enquire about custom sizes.

Our 3100 Series Adhesive PVC Foam Tape is a soft, low density grade of black, closed cell PVC foam tape designed for sealing at low compression. This grade will form a watertight seal at just 30% compression and is adhesive backed to allow for easy application. PVC Foam Tape is made using a swirl-free construction method which also allows for simple and tidy drilling or bolting through the tape after it’s been applied.

3100 Series Adhesive PVC Foam Tape offers good resistance to UV (along with dilute acids and many other liquids) which allows it to be used in outdoor areas. It’s acrylic based adhesive bonds well to most types of surfaces while it’s low compression requirements make it ideal for sealing things like windows, tanks, gutters or narrow flange faces.

Typical Applications for PVC Foam Tape.

  • Sealing windows and doors.
  • Tank seals.
  • Low pressure gaskets.
  • Air-tight seals.
  • Dust seals.
  • Seals and lining for vehicle interiors.
  • Roof and gutter sealing.
  • Anti-vibration.
Colour Black / Dark Grey
Backing PVC Foam
Adhesive Yes, Acrylic. On one side only.
Density 120 kg/cm³
Water Tight Seal Achieved at <30% Compression
Temperature Resistance -40°C to +82°C
Flame Retardant Yes (Federal Motor Vehicle Safety Standard USA)
Hardness 20-40 Shore A Average
Adhesive Strength 1,120 gm/cm
SKU SWM000029P01-3.2

Are other colours available?

Not of this particular grade. Similar grades that are available in either grey or white can be arranged upon request though.

Can it seal salt water?

Sea water, yes. Pool water, not long term. It’s the chlorine that’ll get to it over time.

Are other thicknesses available?

Unfortunately, not as standard, no. This tape can be layered but we’ll be the first to admit this could be a bit messy and tricky to do accurately over long lengths.

How do I cut it?

You’ll be able to get through this with scissors or a sharp Stanley knife (box cutter) without any problems.