Easy-Mix PU-90 Polyurethane Adhesive - Fast, Strong Structural Glue - 50ml
All Prices Include GST.
- High strength type of Polyurethane Adhesive for all kinds of materials.
- Extremely fast cure time. Capable of bearing mechanical loads after 10 minutes.
- Highly viscous adhesive that can be sanded or painted over once cured.
Our Easy-Mix PU-90 Polyurethane Adhesive is a professional-grade product used in numerous industries around the world. It offers a combination of extremely fast cure times, excellent material compatibility and strong adhesion.
Manufactured in Germany by Weicon, this adhesive is based on polyurethane. It is black in colour and is used to create strong, permanent bonds between all types of material. PU-90 (and it’s slightly slower-curing cousin PU-240) both offer a variety of benefits and features. Some of which include:
High Strength Bonding.
Easy-Mix PU-90 Adhesive creates very high strength bonds. In DIN 53283 standard testing, results achieved were comparable to professional-grade epoxies and MMAs. This is a adhesive for close fitting surfaces (max. gap bridging is 0.1mm to 0.4mm). Bonds created with PU-90 will be strong and permanent.
One of the reasons that PU-90 is used all over the world is its cure speed. This Polyurethane Adhesive has excellent initial bonding strength. It instantly grips surfaces which allows it to be used on vertical bond jobs.
PU-90 got its name from its pot life which is just 90 seconds. After 5 minutes, it will achieve 35% of its full cure strength. 10 minutes will see 50% and the capacity for bearing mechanical loads. Full cure is complete after 12 hours.
Excellent Material Compatibility.
PU-90 is suitable for bonding a wide range of materials and surfaces. It is known to be highly compatible with…
- Fibre Composite Materials (e.g. Fibreglass, SMG, CFC, UP-GRP & EP-GRP).
- Most Plastics (Including PVC, ABS, PMMA, PC and Phenol. Untreated PTFE, PE & PP require a primer).
- Epoxy Sheets.
- Polyester Sheet.
- Steel, Aluminium and Stainless Steel.
- Ceramic & Glass.
High Viscosity for Accurate Application.
Easy-Mix PU-90 is quite thick which offers several benefits. It can be applied to vertical surfaces (with instant adhesion) without dripping and is even suitable for use overhead. It is easy to apply accurately to complex bonding lines as it doesn’t run or drip.
Excellent Durability and Environmental Resistance.
PU-90 is highly resistant to weathering and is suitable for use indoors or outdoors. It is also permanently elastic with very good impact resistance.
PU-90 has good chemical resistance and is neutral to materials. Once fully cured, Easy-Mix PU-90 Polyurethane Adhesive will withstand temperatures between -55° and +125°C.
Good Flexibility Once Cured.
Once Easy-Mix PU-90 is fully cured it can be painted over or sanded. Since it’s a polyurethane, most liquid paints will bond to it making it a great choice for fast assembly work in the construction industry.
This adhesive also retains good elasticity and has excellent tensile and shear strength.
Easy to Use and Apply.
PU-90 is a two-part adhesive. Thanks to the Weicon Easy-Mix Dosing System, there’s no complex mixing, measuring or portioning. Application is quite simple.
Reject the first 5 cm of the bead. Now, you’re ready to apply directly to the surface being bonded. The gun makes this easy and fast.
Applications for PU-90 Urethane Adhesive.
Easy-Mix PU-90 Polyurethane Adhesive is used in a variety of different areas around the world. This fast, strong structural glue is suitable for both serial production and repair work while it’s fast cure time makes it a popular choice for tradies and those needing to get jobs done fast.
Some of the more popular uses for this adhesive include…
- Repair and manufacture of plastic parts and components.
- Installation of internal roofing and ducting.
- Air conditioning and heating installation.
- In vehicle construction and repair.
- For car and boat apholstery work and refurbishment.
- Within the marine sector for ship and boat construction and repairs.
- Trade show and exhibition construction.
- For sign making.
- In the metal fabrication and engineering sector.
- For model making and mould construction.
- For the installation of electrical systems, sensors and devices.
|Colour After Curing||Black|
|Density of the Mixture||1.3 – 1.35 g/cm³|
|Pot Life (20°C)||90 Seconds|
|Handling Strength (35%)
When Curing at 20ºC
|Mechanical Strength (50%)
When Curing at 20ºC
|Final Strength (100%)
When Curing at 20ºC
|Adhesive Gap Bridging||0.1mm to 0.4mm|
|Medium e-Module at 20°C||650 – 750 N/mm²|
|Shore Hardness D (DIN EN ISO 868)||66 Shore D|
|Tensile Strength max. (ISO 527)||21 N/mm²|
|Tensile Elongation max. (ISO 527)||35%|
|Temperature Resistance||-55°C to +125°C|
|IMPA Reference Number||81 29 86|
|Medium Shear Strength acc. To DIN 53283|
|Steel (Bright)||19 N/mm²|
|Stainless Steel||17 N/mm²|
Be The First To Review This Product!
Help other Swift Supplies Online Pty Ltd users shop smarter by writing reviews for products you have purchased.