5007 Class 2 Striped Reflective Tape Black/Yellow 24mm Wide x 45 Metres (Engineering Grade)
Ships in 2-3 Days
All Prices Include GST.
- Excellent reflection in full light and at night time (low light).
- Long lasting, can be used indoors and outdoors.
- Aggressive acrylic adhesive bonds well to almost all surfaces and materials.
Our 5007 Class 2 Striped Reflective Tape is an engineering grade retro reflective product. It provides excellent light reflection and its striped, bright colours are very easy to spot in low light or direct sun. This tape can be used indoors or outdoors and is very long lasting.
Class 2 Reflective Tape is available in a selection of colours for marking and identifying different types of hazards, lining signs and more. It has a total thickness of 0.33mm which includes the backing and the aggressive, permanent acrylic based adhesive. This adhesive bonds well to almost all surface types (exceptions are things like PTFE which almost nothing sticks to) and retains this bond strength over a long time.
5007 Class 2 Reflective Tape can be printed on or overlayed with graphics. Each roll is supplied with a release paper liner that is very easy to remove and makes application quick and simple. This tape is able to withstand temperatures between -20°C and +80°C and meets both EN 12899-1 and ASTM D 4956 standards.
- Identifying bollards, posts and other objects in underground car parks
- Identifying potential dangers around the home
- Vehicle marking and identification
- Marine marking and identification
- Traffic signs
- Work signs
- Drawing attention to potential head hazards in commercial facilities
- Anywhere a potential hazard must be visibly marked out
For even more potential uses for Reflective Tape around the home, office or out and about, check out our "14 Uses for Reflective Tape" blog post.
How do I cut it?
You’ll be able to cut this tape with scissors.
Any advice on what to do to make sure it sticks?
Like most adhesives, this tapes’ adhesive performance will be greatly improved if you clean the surface before applying it.
If you’re sticking the tape down to a very smooth surface and it’s practical, roughening the surface a little will increase the surface area available for bonding and allow better adhesion. Nothing too drastic, just a little bit of light sanding will help with most materials.
Adhesive: Acrylic Based
Liner: Yes, release paper
Total Tape Thickness: 0.33mm
Continuous Operating Temperature: -20°C to +80°C
Adhesion to steel: 20 N/25mm
Be The First To Review This Product!
Help other Swift Supplies Online Pty Ltd users shop smarter by writing reviews for products you have purchased.