Aluminium Foil Tape, Reinforced Premium Grade - 48mm Wide x 50 Metres

SKU: SWM000542B01V0003
Availability: Available for Fast Dispatch.
$25.22
INC. GST
$22.70
EX. GST

BULK DISCOUNT RATES

All Bulk Prices Below Are Quoted Including GST.
Buy 6 - 11 and pay only $24.66 each
Buy 12 or above and pay only $24.25 each
  • High strength adhesive foil tape that can be torn by hand.
  • Reinforced for high tensile strength. Superior abrasion and puncture resistance.
  • Strong, pressure-sensitive adhesive bonds to a variety of surfaces.
  • Made in Australia to suit Australian industry requirements.

Our Aluminium Foil Tape, Reinforced Premium Grade is a quality grade of foil tape commonly used for securing heat insulation. 

This tape is made from a thin layer of aluminium foil that is reinforced with polyethylene film and fibre mesh. It is coated on one side with a synthetic rubber pressure sensitive adhesive.

The tape is tough and strong with good tensile strength. It is also easy to use and apply.

Our Reinforced Aluminium Foil Tape can be torn by hand and is highly conformable, so it is easy to wrap around corners and irregular surfaces. 

The synthetic adhesive used for this tape exhibits high holding power and contains flame retardant additives.

This quality tape is manufactured in Australia and has been tested in accordance with several construction and industry standards. Approvals are detailed on the specifications tab.

Adhesive Type Synthetic Rubber
Backing Material Laminated Polyethylene Film,
Fibre Mesh & Aluminium Foil
Total Tape Thickness 0.205mm
Colours Grey / Silver / Aluminium
Tensile Strength 100 N / 25mm
Adhesion to Steel 20 N / 25mm
Temperature Resistance -15°C to +65°C
Maximum Elongation 25%
Roll Length 50 Metres
Approvals
  • Tested & Certified – Green Star – Low VOC emitting-less than 0.5mg/m2/hr
  • Meets new requirements of AS4254.2 2012 (Air handling systems in buildings) 
  • Tested to AS1530.3    Result  0,0,0,0-1 
  • Tested to BS 476 parts 6 & 7 

 

SKU SWM000542B01