Weiconlock AN 302-60 Green Thread Locking Compound 20ml Pen

All Prices Include GST.

In Stock

Container Size
Watch video
Buy In Bulk & Save!
Buy 5 to 19: Pay $18.35
Buy 20 to 39: Pay $17.05
Buy 40 or more: Pay $16.60

Orders Over $100 are Shipped Free within Australia

Delivery via Courier - Australia Wide - $9.90
Fast Delivery via Courier. We use Toll Priority (Air Freight) when possible or a combination of Star Track, Couriers Please, TNT and others depending on the size and classification of the item.

Key Features

  • Anaerobic Thread locker for passive materials
  • Works well with zinc, aluminium, high alloyed steel and nickel parts (amongst others)
  • Medium viscosity and cures with high strength


Weiconlock AN 302-60 Thread Locking Adhesive is a medium viscosity, high strength grade of anaerobic adhesive. It is green in colour and creates bonds that will only be able to be broken deliberately with the aid of specialised tools or solvents. This high temperature thread sealing adhesive withstands temperatures up to 180°C.

Weiconlock AN 302-60 Thread Locker has been designed to permanently lock and seal threads up to M20. This grade is special in that it works quite well with passive metals and materials that are typically hard to bond using anaerobics (without an additional primer). These include high-alloyed steel, aluminium, zinc, gold, chromate layers, anodic coatings, oxide layers, nickel and zinc.


  • Locking bolts and studs
  • Sealing threaded connections
  • Locking and sealing bolts made from passive metals


Can is use Weiconlock AN 302-60 with plastic parts?

It really depends on the type of plastic and the other surfaces. Since AN 302-60 does work with passive surfaces it is definitely possible. That said, trying to use it with a low surface energy plastic (like PTFE) could be problematic. We have seen AN 302-60 being used to lock metal bolts going into melamine though so we know it is possible. Honestly, we’d suggest a test.

What do I have to do to prepare the surfaces?

Clean and dry as much as possible. Weiconlock grades will work on slightly oily surfaces but adhesion will be improved on parts that have been cleaned and degreased.

How long does it take to cure?

About 2-4 hours at room temperature. The large range quoted here is a reflection of two things; the difference in what room temperature can mean and the fact that Weiconlock AN 302-60 will take slightly longer to cure on some surfaces than others. 

Colour: Green

Cure Strength: High

Viscosity: Medium (700 – 1,000 MPa)

For Threaded Joints Up To: M 20

Gap Filling Capacity: 0.15mm (Max.)

Handling Strength:  2-5 Minutes

Final Strength: 2-4 Hours (approx.)

Shear Strength: 25-35 N/mm²

Temperature Resistance: -60°C to +180°C

Food: No

Potable Water: No

Gas Approved: No

IMPA: 81 52 04 (20ml), 81 52 05 (50ml)

ISSA: 75.628.31 (20ml), 75.628.32 (50ml)

SKU SWP000064
Brand Weicon

Weiconlock AN 302-60 Thread Locking Adhesive Technical Data Sheet

Weiconlock AN 302-60 Thread Locking Adhesive TDS

Weiconlock AN 302-60 Thread Locking Adhesive Safety Data Sheet

Weiconlock AN 302-60 Thread Locking Adhesive SDS

Be The First To Review This Product!

Help other Swift Supplies Online Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

You May Also Like

Others Also Bought

More From This Category