Nitrile Rubber (White, FDA) 0.8mm Thick x 1200mm Wide (55 Duro, Per Metre)

SKU: SWM000110B01V0001
Availability: Ships in 1-2 W/Days
$55.61
INC. GST
$50.55
EX. GST

BULK DISCOUNT RATES

All Bulk Prices Below Are Quoted Including GST.
Buy 5 - 9 and pay only $50.32 each
Buy 10 or above and pay only $49.00 each
  • Food grade, FDA compliant, white Nitrile rubber.
  • Excellent resistance to food based oil and grease.
  • Non-marking, non-toxic and non-allergenic with very good mechanical properties.

Our White Nitrile Rubber Sheet (White, FDA Compliant) is a premium grade rubber material. Available in a selection of thicknesses, this rubber is FDA compliant (as per 21 CFR 177.2600) which allows it to be used in applications where it will experience repeated and long term contact with food.

White Nitrile Rubber is non-toxic and non-marking. It is also non-allergenic. Being a Nitrile rubber, it exhibits excellent resistance to oil (especially food based oil) and grease. White Nitrile Rubber Sheet also has excellent tensile strength (6 MPa, minimum) which allows it to be used to make gaskets.

This grade of rubber sheet is typically used in either the food, beverage or pharmaceutical industries or in other specialised applications that require a high quality, non-marking, non-carbon containing rubber. More specifically, White FDA Nitrile Rubber is often used as a flexible pad, lining or strip for applications where food is handled or stored. It is also used for making gaskets for food storage containers and transfer piping as well as for sealing, isolating, protecting and insulating steel or other surfaces.

Our White Nitrile Rubber Sheet withstands temperatures between -25°C and +90°C and has a hardness of 55 Shore A.

Applications for Nitrile Rubber Sheet (White, FDA Compliant)

  • The manufacture of flange gaskets for food grade pipes and tanks
  • Lining of food processing equipment
  • Bumper protection strips for food and beverage handling lines
  • Insulating strips
  • Food grade rubber scrapers
  • Pulley lagging
  • Lining of pipes and tanks
Colour White
Insertion None
Polymer NBR (Nitrile Butadeien Rubber)
Hardness (ASTM D2240) 55 Shore A (+/- 5) Durometer
Continuous Operating Temperature -25°C to +90°C
Elongation at Break (ASTM D412) 350% (Minimum)
Tear Strength (ASTM D624) 15 N / mm
Specific Gravity (ASTM D297) 1.25
Abrasion (ASTM D5963) 250mm³ (max) @ 5N
FDA Compliant As Per 21 CFR 177.2600

For more technical information please see the Technical Data Sheet for our White FDA Nitrile Rubber Sheet located on the media tab.

SKU SWM000110B01
Brand Gaskaseal

Can you provide gut Nitrile gaskets or strips?

We can definitely arrange it. These are made to order but we can usually supply quite quickly (a couple of days + transport). If you would like cut Nitrile gaskets, seals or strips please do not hesitate to contact us to arrange a quote.

Will you supply my order in one continuous length or multiple lengths?

We’ll always supply as long a roll as possible to give you maximum versatility (nothing worse than being just a little too short). Maximum roll length for all thicknesses listed here is 10 metres so if you ordered 8 of one size, it would be supplied in a single roll.

Is your white Nitrile rubber available adhesive backed?

Not as standard, no. We can arrange for a peel-off adhesive to be affixed if it is required. Once again, if you do require adhesive backed Nitrile we invite you to contact us as we will need to get a little bit of information on the exact application to make sure we choose the right adhesive.