BULK DISCOUNT RATES
All Bulk Prices Below Are Quoted Including GST.
| Buy 6 - 11 | and pay only $17.26 each |
| Buy 12 or above | and pay only $16.73 each |
Description
- A strong, elastic adhesive and sealant.
- MS Polymer based adhesive that works with most surfaces and materials.
Flex+Bond Liquid is a versatile adhesive sealant that is UV resistant, resiatant to ageing and salt water. Engineered by Weicon in Germany, this adhesive is based on MS Polymers and is completely free of silicones, solvents and isocyanates. It sticks to most materials and surfaces.
Flex+Bond is very easy to work with. It is able to be sanded and painted (wet-on-wet).
Flex+Bond is white in colour.
Skin-Over time for Flex+Bond Liquid is about 25 minutes while full curing will occur at a rate of about 2-3mm in the first 24 hours. This pasty adhesive sealant will withstand temperatures between -40°C and +90°C once cured.
Applications for Flex+Bond.
Flex+Bond Adhesive Sealant is used in a number of industries including…
- Electrical and electronic device manufacture and repair.
- Metal engineering and tank construction.
- Casting of cable connection.
- Valve construction and repair.
- Heating, Ventilation and Air Conditioning (HVAC) Technology.
Specifications
| Basis | One Part MS Polymer |
|---|---|
| Colour | White |
| Texture | Pasty |
| Can be painted | only "wet into the wet" within 3 hours at the latest |
| Density | 1.44 g/cm³ |
| Cure Type | Moisture curing |
| Processing Temperature | +5°C to +40°C |
| Curing Conditions | +5°C to +40°C 30% - 95% RH |
| Skin-Over Time | 25 Minutes |
| Cure Speed (First 24 Hours) | 2-3mm |
| Volume Change (DIN 52451) | -1% |
| Gap Bridging Max. | 5mm |
| Max. Sealing Joint Width | 25mm |
| Shore Hardness (Shore A) (DIN ISO 7619) |
42 Shore A (±5) |
| Elongation At Break (Tensile) (DIN 53504 / ASTM D 412) |
650 / 300 (±5) % |
| Tensile Strength of Sealant | 3.3 N/mm² |
| Medium Lap Shear Strength (DIN EN 1465/ASTM D 1002) | 2.1 N/mm² |
| Tear Resistance (DIN 53515 / ASTM D 1002) | 20 kN/m |
| Temperature Resistance (Continuous) |
-40°C to +90°C |
| Building Material Category Code (DIN 4102) | B 2 |
| SKU | SWM000235B01V0001 |
|---|---|
| Model # | 13354085 |
| Brand | Weicon |
FAQs
What should I do to prepare the surface?
Before applying Flex+Bond, the surfaces must be clean and free of grease.
Many surface contaminants (such as oil, dust and dirt) can be cleaned with our Weicon Surface Cleaner. For heavily soiled metal surfaces we suggest our Weicon Cleaner Spray S. If you need to remove old paint or adhesive residues, our Sealant and Adhesive Remover is likely more suitable.
Mechanical roughening (e.g. sanding or sand-blasting) can considerably improve adhesion when bonding smooth surfaces.
Do I need any special tools to apply Flex+Bond?
No. Flex+Bond can be squeezed directly from the tube by hand.
