Vidaflex 942 Sleeving, Black (Pre-Cut Pack) 5mm Dia x 10 Metres Long

Acrylic Coated Fibreglass Electrical Sleeving

All Prices Include GST.

In Stock
Cut to Order, Ships in 2-3 W/Days.
Buy In Bulk & Save!
Buy 3 to 4: Pay $24.53
Buy 5 or more: Pay $22.48

5mm Dia, short rolls of this quality electrical insulation sleeving. Made from acrylic coated fibreglass, Vidaflex 942 has good electrical insulation properties and mechanical strength.

Link to our range of Vidalfex 942 Sleeving sizes and colours.
Browse Our Vidaflex 942 Sleeving Range.
  • Brightly coloured tough outer layer for easy lead identification
  • Excellent dielectric strength and good thermal endurance
  • Flexible and easy to work with
  • Available in a range of sizes and colours

Vidaflex 942 Acrylic Fibreglass Electrical Sleeving is flexible insulating sleeving made from braided fibreglass that is coated in a solid layer of acrylic resin. The resulting sleeving has a tough outer shell that resists abrasion and is available in a range of different colours to make lead and cable identification easy.

Vidaflex 942 is available in a large range of bore sizes and withstands continuous exposure to temperatures up to 155°C (Class F using the old thermal electrical classification system). It has good dielectric strength and can be used on a range of low, medium and high voltage equipment.

Applications for Vidaflex 942 

  • Insulation of motor lead outs, electrical wiring and cables
  • Cable and lead identification
  • Bundling and consolidation of leads
  • Mechanical and abrasion protection for cables


Are other colours available?

There are, though they’re not standard. In the last few years the manufacturer of this sleeving has cut-down on their sizes and colours leaving us with access to a far more limited colour selection. If there’s a particular colour you require please do let us know what you’re after as well as the size and quantity and we’ll see if we can track it down for you.

Does it stretch when being fitted?

Only a very little bit. Because of the solid acrylic resin on the outside, Vidaflex 942 doesn’t have an awful lot of give. You will be able to achieve a little depending on the force exerted but we don’t suggest banking on any more than about 5%.

Does it fray?

The fibreglass inner lining can a little but generally the outer resin liner stops this from happening too much. We do suggest cutting with scissors or a very sharp knife. Blunter tools can pull at the fibreglass.

Continuous Operating Temperature 155°C
Short-Term Operating Temperature 200°C
Inside Material Braided Fibreglass
Outside Material Acrylic Resin
Nominal Wall Thickness for 1-3mm Ø Sizes 0.45mm (Minimum)
Nominal Wall Thickness for 4-6mm Ø Sizes 0.7mm (Minimum)

For more technical information please see the Technical Data Sheet for our Vidaflex 942 Electrical Insulation Sleeving located on the media tab.

SKU SWM000045P01V0005
Brand Krempel
Shipping Weight 0.2500kg
Shipping Width 0.180m
Shipping Height 0.027m
Shipping Length 0.180m
Shipping Cubic 0.000875000m3
Unit Of Measure Each

Technical Data Sheet.

TDS Link        
Vidaflex 942 Acrylic Fibreglass Electrical Sleeving TDS        

Others Also Bought

More From This Category