Weiconlock AN 305-74 Flange Sealing Adhesive - 50ml Pen

Liquid Gaskets for Permanent Sealing and Locking.

All Prices Include GST.

In Stock
Available for Fast Dispatch.
Buy In Bulk & Save!
Buy 1 to 5: Pay $25.78
Buy 6 to 11: Pay $23.50
Buy 12 to 23: Pay $22.19
Buy 24 or more: Pay $20.39

50ml Pens of this easy to use alternative to thin, cut gaskets for metallic flanges and assemblies. Weiconlock AN 305-74 Liquid Gasket Adhesive is easy to apply, cures with high strength, has a high viscosity and is able to cover gaps up to 0.5mm.

Browse our range of AN 305-74 Sizes.
Browse our range of Weiconlock AN 305-74 Sizes.
Flange Sealing Range Link
Browse our full Weiconlock Flange Sealing & Gasket Adhesives Range.
  • High Viscosity for Larger Gap Filling and Accurate Application.
  • Elevated Temperature Resistance, Up to 180°C.
  • High Strength for Hard to Disassemble, Permanent Bonds.

Weiconlock AN 305-74 Flange Sealing Adhesive is a high strength, high viscosity grade designed for sealing metal flanges, housings, gearboxes and connections.

This grade of anaerobic adhesive is manufactured in Germany by Weicon and offers a variety of benefits. These are expanded on in the sections below:

Elevated Temperature Resistance.

Our Weiconlock AN 305-74 is a high temperature grade of flange sealing adhesive. This sealant will withstand continuous exposure to temperatures between -60°C and +180°C making it ideal for a wide range of equipment and applications.

High Viscosity & Larger Gap Filling Capacity.

Weiconlock AN 305-74 has a viscosity of 30.000 - 100.000 ht mPa·s (according to Brookfield at 25°C). This thick nature makes it a good choice for applying to complex flange shapes (such as compressor connections) or narrow flanges that require very accurate application.

Partly due to its’ thick nature, Weiconlock AN 305-74 is also able to cover larger gaps than many other anaerobic adhesives. It can bridge gaps up to 0.5mm. This allows it to be used on slightly worn or misaligned flanges and still seal.

High Strength, Hard to Disassemble Joins.

Weiconlock AN 305-74 cures with high strength for permanent bonds and seals. Strength ratings are summarised further below.

Specialised tools or the application for heat (300°C) will be required to disassemble joins made with Weiconlock AN 305-74.

Weiconlock AN 305-74 Key Specs Overview.

Colour Orange
Viscosity 30.000 - 100.000 ht mPa·s
Maximum Gap Bridging 0.5mm
Prevailing stregth 5 - 10 Nm
Handling Strength at Room Temperature 15 - 30 Minutes
Temperature Resistance -60°C to +180°C.

For more detailed information on this high-quality adhesive, please consult the specifications tab or the Technical Data Sheet via the Media Tab.

The Weiconlock Pen System.

One of the features of all Weiconlock Threadlockers, Flange Sealants, Retaining Adhesives and Pipe Sealers is the pen system they use for most size containers (300ml varieties are supplied in cartridges and are the one exception).

This special pen makes accurate application natural and easy. It also helps to reduce wastage as there’s less chance of spillage.

The Weicon Pen System has been used in all kinds of industries all over the world for decades and continues to be a key point of difference for these German-Made adhesives.

Common Features of All Weiconlock Anaerobic Adhesives.

WEICONLOCK® are one-component anaerobic adhesives and sealants, especially made for metal assembly parts.

The full range covers over 60 different grades designed for everything from Thread Locking, Pipe Sealing, Flange Sealing and Retaining Cylindrical Assemblies like bearings. There are special grades for potable water applications, gas lines, oxygen service and more.

No matter the grade chosen, all types of Weiconlock Adhesive have a few things in common:

Excellent Chemical Resistance.

All grades of Weiconlock Adhesives are resistant to a large variety of different chemicals, fluids and gases. Some of the more common are summarised in the table below. A more comprehensive list is also available via the Media Tab..

Media Resistance   Media Resistance
Acetic acid 80% o   Oxygen
Aromat, Solvent +   Phenol +
Brake fluid +   Propane +
Diesel, heating oil +   Seawater +
Edible oil +   Silicone oil +
Fuel oil +   Turpentine +
Glycocol, glycine +   Vinegar +
Helium +   Water (acidic) under PH 7 +
Hydrochloric acid +   Water PH 7 to 8 +
Isobutane +   Water (alk.) over PH 8 +
Kerosene +   Water, chlorinated +
Mineral oil +   Water, cooked o
Naphtha, petroleum +   Water, distilled +
Natural gas - dry +   Water, wastewater (sewage) +
Nitrogen gas +   Xylene, dimethylbenzene +

+ = Good Resistance.
o = Resistant
% = Limited Resistance.
- = Not Resistant.

Easy to Use.

In general, WEICONLOCK does not require special pre-treatment as slightly oily surfaces (e.g. on as received parts) will be tolerated.

However, best results will be achieved on cleaned, degreased parts (use WEICON Surface Cleaner). If required, the parts should be slightly roughened.

WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). Apply continuous bead on one side of flange, join and tighten parts quickly.

For sealing applications (pipe fitting) apply WEICONLOCK in circular motions on the thread. Screw pipe threads together and tighten until desired orientation.

Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.

Simple to Store.

WEICONLOCK can be stored in the unopened original container for at least 24 months at room temperature. Keep away from heat sources and direct sunlight. The air in the bottle/tube keeps WEICONLOCK liquid.


Colour Orange
Viscosity 30.000 - 100.000 ht mPa·s
Maximum Gap Bridging 0.5mm
Breakaway strength (Thread)  16 - 24 Nm
Prevailing stregth 5 - 10 Nm
Shear strength Nmm² (DIN 54452)* 5 - 10 N/mm²
Handling Strength at Room Temperature 15 - 30 Minutes
Final strength (100%) after 12 Hours
Temperature Resistance -60°C to +180°C.

*Strength values based on M 10 screws, 8.8 grade, thickness of nut 0,8.d Static shear strength based on cylindrical parts of abt. Ø 13 mm, tolerance (D-d) = 0,05 mm, l/d = 0,88 

SKU SWM000058B01V0001
Model # 30574150
Brand Weicon
Shipping Weight 0.0770kg
Shipping Width 0.220m
Shipping Height 0.035m
Shipping Length 0.035m
Shipping Cubic 0.000270000m3
Unit Of Measure ea

Technical & Safety Data Sheet.

TDS Link SDS Link      
Weiconlock AN 305-74 TDS Weiconlock AN 305-74 SDS