Flex 310 M HT 200 High Temperature Adhesive Sealant 310ml
All Prices Include GST.
- High temperature grade capable of handling 200°C for short periods
- Can be powder coated (once fully cured)
- Silicone free, high strength and suitable for indoor and outdoor use
Weicon Flex 310 M HT 200 High Temperature Sealant is a special grade designed to handle elevated temperatures. This adhesive sealant is able to withstand 180°C for 45 minutes or 200°C for 30 minutes. This, coupled with the fact that it is silicone free, makes it ideal for use in bonding parts that need to be powder coated. Once HT 200 is fully cured, it can be powder coated too.
Weicon Flex 310 M HT 200 High Temperature Sealant is grey in colour so that it matches in with metal components. It is completely free of silicone and solvents and has excellent UV resistance which allows it to be used indoors or outdoors. It is also compatible with fresh and salt water and remains permanently elastic with good elongation (400%).
Flex 310 M HT 200 creates strong adhesive bonds and is compatible with most materials and surface types. It’s easy to apply using a standard caulking gun and has a pasty consistency to make accurate application quite simple.
Applications for Flex 310 M HT 200
- Sealing and bonding in heating, ventilation and air conditioning systems
- Repairs to and construction of wagons, vehicles and ships
- Container and tank construction and repair
- Bonding and sealing metal plates, parts or components that need to be powder or thermal coated
- Bonding and sealing application where silicones are not able to be used
Do I need any special equipment to use this?
No. Weicon Flex 310 M HT 200 High Temperature Sealant can be applied using standard caulking guns.
How long does it take to cure?
Elastic adhesives cure by reacting with the humidity in the surrounding environment so cure time is impacted by both the room temperature and humidity. Assuming 50% relative humidity and a temperature of about 23°C, you can expect curing to occur at a rate of 3-4mm per 24 hours. This is measured from the sealants surface working in.
In higher temperatures and/or humidity, curing will be accelerated. Skin over time is 10 minutes (approximately).
Continuous Operating Temperature: -40°C to +90°C
Short-Term Operating Temperature: 180°C (45 Minutes)
Short-Term Operating Temperature: 200°C (30 Minutes)
Skin-Over Time: 10 Minutes
Cure Speed: 3-4mm in the first 24 hours
Shore Hardness: 55 Shore A
Food Grade: No
Potable Water: No
Elongation at Break: 40%
Building Material Category: B 2
IMPA: 81 52 78
Be The First To Review This Product!
Help other Swift Supplies Online Pty Ltd users shop smarter by writing reviews for products you have purchased.