Flex 310M Stainless Steel Adhesive Sealant - 310ml
High strength, elastic adhesive sealant for metals.
All Prices Include GST.
|Browse our range of MS Polymer Based Adhesives & Sealants.|
- Excellent compatibility with stainless steel, aluminium and other non-ferrous metals
- Colour matched to fit in with stainless steel
- ISEGA certified and 100% free of silicone and solvents
Weicon Flex 310 M Stainless Steel Sealant is a high quality elastic adhesive made in Germany. This grade is non-corrosive, neutral curing and completely free of silicones and solvents. It can be used indoors or outdoors (it has excellent UV resistance), is resistant to fresh water and salt water and is very long lasting with good aging stability.
Weicon Flex 310 M Stainless Steel Sealant has been colour matched to suit stainless steel. In addition to stainless, it also bonds very well to aluminium and other types of non-ferrous metals. 310 M Stainless Steel has a pasty consistency and can be accurately applied to vertical or horizontal surfaces using a standard caulking gun.
Once fully cured, 310 M Stainless Steel Sealant will tolerate movement of up to 20% while maintaining its bond and withstand temperatures up to 90°C. This grade has been certified by ISEGA as an adhesive suitable for use in food technologies.
Applications for Flex 310 M Stainless Steel Adhesive Sealant
- Heating, ventilation and air conditioning assembly, sealing and repair
- Metal construction
- Sealing joints and seams on aluminium, stainless steel or non-ferrous metals
- Kitchen sealing and bonding work
- Bathroom sealing and bonding work
- Electrical and lighting sealing and installation
- Sealing and bonding in marine applications
- Wherever a sealant that matches the colour of stainless steel is required
- Anywhere sealants or adhesive containing silicone are not permitted or suitable
Do I need any special equipment to use this?
No. Weicon Flex 310 M Stainless Steel Sealant can be applied using standard caulking guns.
How long does it take to cure?
Elastic adhesives cure by reacting with the humidity in the surrounding environment so cure time is impacted by both the room temperature and humidity. Assuming 50% relative humidity and a temperature of about 23°C, you can expect curing to occur at a rate of 3-4mm per 24 hours. This is measured from the sealants surface working in.
In higher temperatures and/or humidity, curing will be accelerated. Skin over time is 10 minutes (approximately).
|Colours||Grey (Stainless Steel)||-|
|Basis||1 Component Polyoxypropylener||-|
|Stability / Run-off||<1mm||ASTM D 222|
|Curing Conditions||+5°C to 40°C w/ 30%-95% Relative Humidity.||-|
|Skin-Over Time||15 MInutes||50% Relative Humidity, 23°C.|
|Cure Speed (First 24 Hours)||3mm||-|
|Volume Change||-1%||DIN 52451|
|Max. Gap Filling Depth||5mm||-|
|Max. Gap Filling Width||25mm||-|
|Shore Hardness||45 Shore A (+/- 5)||DIN 535 / ASTM D 224|
|Elongation at Break||280% (+/- 5)||DIN 53504 / ASTM D 2240|
|Tensile Strength of the Pure Adhesive Sealant||3.1 N/mm²||-|
|Average Tensile Shear Strength||2.5 N/mm²||DIN 53283 / ASTM D 12|
|Tear Strength||11 N/mm²||DIN 53515 / ASTM D 1002|
|Max. Movement Capacity||20%||-|
|Overpaintable w/ Liquid Paint||No.||-|
|Building Material Category Code||B 2||DIN 412|
|Temperature Resisance||-40°C to +90°C Continuous
Up to 120°C for Short Periods.
|Minimum Shelf Life||12 Months when stored at 5°C to 25°C||-|
|Unit Of Measure||ea|