GMK 2410 Rubber Metal Contact Adhesive - 700gm Can

Strong, long-lasting glue for larger surface areas.

All Prices Include GST.

In Stock
Available for Fast Dispatch.
Watch video
Buy In Bulk & Save!
Buy 2 to 4: Pay $57.38
Buy 5 to 9: Pay $51.92
Buy 10 or more: Pay $49.25

700gm Cans of this high quality contact adhesive designed for larger surface areas. GMK 2410 Rubber Metal Adhesive works very well with leather, felt, insulation materials, textiles wood and many plastics in addition to rubber and metal.

Contact and Vulcanising Adhesive Range Link
Browse our Contact & Vulcanising Glues Range.
  • High strength adhesive designed for bonding rubber to rubber and rubber to metal
  • Excellent choice for bonding larger surface areas that require a high strength bond with some flexibility retained.
  • Also able to bond cellular rubber, leather, felt, insulation, textiles, wood and many plastics.

GMK 2410 Rubber Metal Contact Adhesive is a industrial-grade adhesive designed specifically for bonding rubber to metal and rubber to rubber. This high strength adhesive is used to create permanent, strong bonds and is usually used for larger surface areas.

In addition to its excellent compatibility with rubber and metal, GMK 2410 also works very well with cellular rubber (like our Neoprene Sponge Sheet), felt, insulation material, textiles, wood and many different types of plastic.

GMK 2410 is not recommended for bonding artificial PVC leather, PVC foam, polyethylene or polypropylene.

It is a polychloroprene (CR) based rubber adhesive that is yellow-ish in colour. Bonds created with GMK 2410 are not affected by humidity and exhibit excellent, permanent elasticity. Once fully cured, this adhesive will withstand temperatures between -40°C and +80°C as well as short-term spikes up to 100°C.

Contact adhesion time (which begins once the surfaces are pressed together) is approximately 10 minutes with some variation due to temperature and humidity to be expected. Full cure will be achieved after about 24 hours. GMK 2410 is manufactured in Germany by Weicon.

This versatile industrial contact adhesive is available in a large range of sizes and forms to suit the needs of all the different applications in which it is used.

Applications for GMK 2410 Rubber Metal Contact Adhesive

  • Bonding rubber pads and sheet to metal wall structures, posts and piping.
  • Sticking rubberised sponge and foam to metal supports
  • Laminating different thicknesses of rubber sheet and sponge
  • Gluing down rubber sheet to metal trays and plates
  • Laminating felt to form new thicknesses or bonding felt to metal
  • Gluing rubber to wood 


Do I need to apply this to both surfaces or just the one?

Both. GMK 2410 Contact Adhesive only works when it has been applied to both the surfaces being bonded. There is a chance with some particular materials you will achieve adhesion with just one but it is not at all recommended.

How much will I need?

This depends on a few things, how thick you like to put down the adhesive, how porous the material is (you’ll go through more with felt then steel) and how large the area is you’re bonding.

All that being said, the standard rule of thumb is to allow for using around 250-350 grams of adhesive per square metre being bonded. Obviously, this will vary depending on individual circumstances though.

What is its pot life?

With GMK 2410, it’s not so much pot life you need to worry about as evaporation time. Try to close the container up as soon as you’re finished using it and it should be fine.

As for evaporation time, the best way to use this adhesive is to apply to both surfaces and allow to dry for about 5-10 minutes. Basically, you need to wait until the material is dry but still feels a little bit tacky to the touch. That’s when you should stick the surfaces together and apply pressure. If you wait too long before sticking them, the adhesive will have evaporated and another layer will need to be applied.

Colour Yellow(ish) - Brown
Basis Polychloroprene (CR)
Viscosity 2,400 MPa (Approx.)
Evaporation Time 5-10 Minutes
Contact Adhesion Time 10 Minutes
Final Strength  24 Hours (Approx.)
Continuous Temperature Resistance -40°C to +80°C
Short-Term Temperature Resistance 100°C
Processing Temperature +15°C to +35°C
Storage Stability 12 Months (Minimum, Unopened)
Consumption 250 - 350 g/m² (Approx.)

Median Tensile Shear Strength
(Tested in accordance with DIN 53281-83)

Galvanised Steel to EPDM Rubber 0.16 N/mm²
Galvanised Steel to Galvanised Steel 1.6 N/mm²
Galvanised Steel to SBR Rubber 0.54 N/mm²
Galvanised Steel to NBR Rubber 0.54 N/mm²

For more technical information please see the Technical Data Sheet on our GMK 2410 located on the media tab.

SKU SWM000125B01V0004
Model # 16100700
Brand Weicon
Shipping Weight 0.7500kg
Shipping Width 0.200m
Shipping Height 0.200m
Shipping Length 0.400m
Shipping Cubic 0.016000000m3
Unit Of Measure Each

Technical & Safety Data Sheet.

TDS Link SDS Link      
GMK 2410 Rubber Metal Contact Adhesive TDS GMK 2410 Rubber Metal Contact Adhesive SDS      

Related Content & Information.

GMK 2410 Contact Adhesive Demo Video        
GMK 2410 Contact Adhesive Demo Video        

Others Also Bought

More From This Category