Weicon

A high strength, fast curing and low viscosity cyanoacrylate. VA 8312 is highly compatible with plastic and rubber. This versatile glue also bonds well to metal, leather and balsa wood and has been ISEGA recognised.

A very fast curing and compatible with a large variety of materials. Weicon VA 8406 Super Glue is highly reliable, creates strong bonds and can be used in a range of applications. It’s particularly good at bonding plastics and rubbers.

A very thick and pasty type of cyanoacrylate, Contact Gel Super Glue works well with almost all materials and is slow curing to allow you to position objects after applying the glue. It’s perfect for bonding porous materials like leather, cork or sponge.

A specially engineered cleaner for fast and effective cleaning of sensitive, clear glass and plastic. Visor Cleaner Spray is anti-static, anti-reflective and leave behind no streaks or residues.

A special kind of super glue developed especially for bonding metal parts and components. VM 120 is methyl ester based and has a slightly extended cure time to allow you a few seconds to position the parts after you apply the glue.

An incredibly versatile spray that combines lubrication, penetration, cleaning, preservation, rust protection & water-displacement. This high-performance spray will have a use in any workshop, garage or facility.

A powerful and versatile food grade oil based lubricant that combines excellent penetration, cleaning, rust removal, water displacement and corrosion protection into one, easy to use spray.

A specialised primer that speeds up the cure of our Weiconlock adhesives and allows there use at lower temperatures, with more materials and for bridging larger gaps.

A medium strength, high viscosity thread locker. Weiconlock AN 301-43 is approved for potable water and gas and is a non-marking grade designed especially for critical applications.

A high strength, medium viscosity adhesive for permanently locking bearings, shafts and housings. Weiconlock AN 301-48 is NSF approved for Water, DVGW Approved for Gas and fast curing.

A specialised adhesive with PTFE. AN 301-65 is used for thread locking, pipe sealing and making liquid gaskets for close fitting metal flanges. DVGW approved for gas connections and NSF approved for potable water.

A thread locker for small gauge threaded parts that need to be undone from time to time. Weiconlock AN 302-21 is a low strength, removable thread locker that allows easy disassembly. It is vibration proof and non-marking.

A low strength, medium viscosity thread locker for connections that you want to be able to disassemble in the future. AN 302-22 withstands 150°C and is vibration-proof. Perfect for automotive and marine thread locking applications.

A high viscosity and medium strength general-purpose thread locking adhesive. Weiconlock AN 302-43 is blue in colour and has been approved by DVGW for use with gas connections and KTW for use with drinking water.

A medium strength and high viscosity locking adhesive. AN 302-45 tolerates coarse threads, is blue in colour and approved by DVGW for use in sealing and locking gas lines. It is particularly well suited for sealing coarse threads.

An anaerobic adhesive designed to work with passive materials (like aluminium, nickel, gold, zinc and chrome) without the need for an additional primer. 302-60 is a permanent thread locker with a high cure strength and temp. resistance.

A high strength, medium viscosity thread locker. AN 302-70 is used on threaded parts and stud bolts. It creates a permanent seal and will make these parts very hard to disassemble. Green in colour and DVGW approved for use with gas.

A high temperature grade of thread locking adhesive able to withstand up to 200°C. 302-72 creates permanent, high strength bonds and seals and has a high viscosity which allows it to be used on threads up to M56.

A high viscosity, high strength anaerobic adhesive able to be used not just on metal, but on many types of passive materials. Weiconlock AN 302-80 works with zinc, aluminium, nickel, high alloyed steel and many plastics. Very fast curing.

A threadlocker for very small parts. Weiconlock AN 302-90 has a very low viscosity which allows it to run and fill small hairline cracks. It cures with high strength for permanent, strong locking of small bolts and close fitting metal connections.

A liquid gasket that can replace material gaskets for close fitting, metallic flanges, gearboxes and motor casings. This grade can tolerate gaps up to 0.5mm, is thick and easy to apply and cures with high strength. It withstands 200°C.

A thick, pasty adhesive for threaded pipes and connections up to M80. AN 305-77 has a medium strength rating (can be disassembled when needed) and is approved for use with potable water and gas.

A Red, High Temperature (200°C) flange sealing adhesive. Weiconlock AN 305-18 has an immediate sealing effect and can cover larger gaps between flanges. It has a high viscosity and a high cure strength.

A low strength, high viscosity liquid gasket and pipe sealing adhesive. Weiconlock AN 305-67 is enhanced with PTFE for excellent sealing and is non-marking. White in colour, it is fast and simple to disassemble when required.

A specialised adhesive with PTFE. AN 305-72 can be used for thread locking, pipe sealing, locking cylindrical assemblies or even for making liquid gaskets for close fitting metal flanges. DVGW and AGA approved for gas connections.

A liquid gasket adhesive that allows easy disassembly when it’s required. Our Weiconlock AN 305-73 Flange Sealing Adhesive is ideal for sealing closely-mated flange connections on a wide range of equipment.

An easy to use alternative to thin, cut gaskets for metallic flanges and assemblies. Weiconlock AN 305-74 Liquid Gasket Adhesive is easy to apply, cures with high strength, has a high viscosity and is able to cover gaps up to 0.5mm.

An industrial grade of anaerobic adhesive. AN 305-77 has been certified by DVGW and the AGA for gas pipe sealing and by BAM for oxygen. It is able to tolerate larger bonding gaps (up to 0.5mm) than most anaerobic adhesives.

A high viscosity, high strength anaerobic adhesive for permanent, strong pipe and thread locking. Weiconlock AN 305-86 has a thick, pasty nature for accurate application to pipes up to M56 and an extended cure time.

A very high strength, low viscosity (runny) adhesive for bearings, shafts and bushes. Weiconlock AN 306-03 has a fast cure time and is ideal for permanent locking and sealing.