Plastic Bonding Kit - 12gm Super Glue

SKU: SWM000243P01V0001
$47.84
INC. GST
$43.06
EX. GST
Container Size

BULK DISCOUNT RATES

All Bulk Prices Below Are Quoted Including GST.
Buy 2 or above and pay only $45.24 each
  • Bond even the hardest plastics with our German-Engineered VA 8406 Super Glue and CA Primer.
  • Can be used to stick polyethylene, polypropylene and even PTFE.
  • Professional grade glue and primer manufactured by Weicon in Germany.

Depending on the type of plastic you are working with, bonding can be a real problem. For higher surface energy grades like ABS or Nylon, a good quality super glue will usually work without the need for a primer. However, when you’re working with low surface energy grades, things become a little more complicated.

To address this issue, we’ve put together our Plastic Bonding Kit. Each kit contains a tube of our VA 8406 Industrial-Grade Super Glue and a 10ml Bottle of our renowned Contact Primer for Polyolefins.

By applying the primer to the surface of the plastic, you will be changing its surface structure. This will allow the glue to bond and achieve good, strong adhesion where it would otherwise have been impossible.

Applications for our Plastic Bonding Kit.

Our Plastic Bonding Kit will allow you to create high strength, long lasting bonds between a wide range of plastics and other materials. Just some of the materials now able to be bonded include…

  • Polypropylene (PP)
  • Polyethylene (PE) – Include Low and High-Density Grades (LDPE and HDPE as well as UHMWPE).
  • Silicone Rubber
  • PTFE (Polytetrafluoroethylene) (aka Teflon®)
  • EPDM Rubber (both Sulphur and Peroxide Cured).
  • Thermoplastic Elastomers.
  • PVC (Polyvinyl Chloride)
  • ABS
  • Polycarbonate (aka Lexan®)
  • Nylon
  • Acetal
  • Polyester Resin Based Materials.
  • Phenolic Resin Based Materials (e.g. Bakelite).
  • Rubber Materials (e.g. Neoprene, Natural, Nitrile, Viton).
  • Glass
  • Ceramic
  • Metals

Technical Details for our VA 8406 Industrial Super Glue

Figures given in the table below do not include the use of the primer. Strength will only increase when the primer is used in conjunction with this glue.

Colour Colourless / Clear
Initial Adhesion on Nora Test Rubber < 5 Seconds
Full Cure 24 Hours
Viscosity (20°C Brookfield) 20-50 MPa
Continuous Temperature Resistance -50°C to +80°C
Short-Term Temperature Resistance +100°C
Squatting Temperature 150°C
Max. Gap Covering Power 0.1mm
Ester Type Ethyl
Potable Water ISEGA Recognised as an Adhesive for Food Technology
Food Applications ISEGA Recognised as an Adhesive for Food Technology
Shear Strength Adhesion to Sand-Blasted Steel 22 N/mm² (DIN 53283)
Shear Strength Adhesion to Rigid PVC 14 N/mm² (DIN 53283)
Shear Strength Adhesion to ABS 13 N/mm² (DIN 53283)
Shear Strength Adhesion to NBR >8 N/mm² (exceeds strength of rubber) (DIN 53283)

 

Material Compatability

Metal Compatible
Plastic Highly Compatible (High Surface Energy and Medium Surface Energy Plastics Only)
Rubber Highly Compatible
EPDM Rubber Highly Compatible
Balsa Wood Not Compatible
Glass / Ceramic Compatible
Leather Not Compatible

For more technical details, use guidance and product details please see the attached Technical Data Sheet (located on the Media tab for this product).

SKU SWM000243P01
Brand Weicon