Easy-Mix RK-7200 MMA Transparent Structural Acrylic Adhesive - 50gm

SKU: SWM000264B01V0001
MPN: 10564050
Availability: Available for Fast Dispatch.


All Bulk Prices Below Are Quoted Including GST.
Buy 3 - 5 and pay only $65.65 each
Buy 6 or above and pay only $62.67 each
  • Transparent / clear acrylic glue.
  • High strength bonds on a variety of materials.
  • Fast initial cure.
  • Impact resistant with excellent residual elasticity.
  • Easy-Mix system makes application easy. No measuring, no manual mixing. Apply directly to the surface.

Our Easy-Mix RK-7200 MMA Adhesive is a high strength, solvent-free structural adhesive. This versatile glue is transparent once cured and is often used for applications where the bonding seam must not be visible (e.g. attaching glass or polycarbonate panels).

RK-7200 achieves initial strength (35% of final) quite quickly, around 8 minutes.

Like many of the structural acrylics in our range; RK-7200 Acrylic Adhesive utilises the Weicon Easy-Mix dosing system which eliminates the need for complex mixing or measuring. Manufactured in Germany, this professional-quality adhesive is widely used for automotive, engineering, construction, marine, electrical and general repair work.

Easy-Mix RK-7200 has a variety of features and benefits, some of which are expended on below:

Strong Bonding of a Variety of Materials.

RK-7200 MMA Adhesive is designed for permanent, high-strength bonding. This glue is highly compatible with the following material types:

  • Metals – Including steel, aluminium, stainless steel and many coated metals.
  • Wood
  • Ceramics
  • Polyurethane
  • Epoxies
  • Many Plastics – Including PVC, ABS, Fibreglass, Phenolic and PMMA

These (like most) adhesives can struggle with very low surface energy types of plastic like polyethylene (PE), polypropylene (PP) and PTFE (Teflon®). For bonding these materials with RK-7200, the use of a primer or other surface pre-treatment is likely required.

The attached RK-7200 Technical Data includes shear strength ratings for many of the above listed materials.

Application Versatility.

In many situations, bond strength is just one of the considerations that go into choosing an adhesive. Once it’s fully cured, RK-7200 offers a variety of other features which may be of benefit for your job:

  • Can be grinded and painted over once it’s fully cured.
  • Withstands temperatures between -55°C and +125°C.
  • Resistant to weathering, can be used indoors or outdoors.
  • Excellent chemical resistance.

Accelerated Cure Time.

RK-7200 has a pot life of 1-2 minutes. After application you can expect cure times to be approximately:

  • 8 Minutes for Handling Strength (35% Cure).
  • 120 Minutes for Mechanical Strength (50% Cure).
  • 6 Hours for Full Cure (100%).

Easy to Use thanks to the Easy-Mix System.

The Weicon Easy-Mix Dosing System eradicates complex mixing and measuring and makes getting the right amount of glue, where you need it, simple.

Simply slot the container of RK-7200 into a compatible dispensing pistol (we suggest the Weicon D 50) and attach the Quadro Mixing Nozzle (one is included with each container). That’s it. When you pull the trigger the two parts that make up RK-7200 Acrylic Adhesive will be mixed as they travel along the nozzle so that, by the time they reach the surface, you have a single homogenous adhesive.

Spare mixing nozzles are also available, and the gun works with a variety of our adhesives, so you can mix and match depending on your particular requirements. 

Typical Applications for RK-7200 Structural Acrylic Adhesive.

RK-7200 MMA Structural Adhesive is used around the world in a variety of construction, repair and manufacturing environments. It is most commonly used for jobs that require bond lines that can't be seen. Some of the more common applications include:

  • Attaching glass panels.
  • Plastic part construction.
  • Residential and commercial construction.
  • Boat construction and repairs.
  • Working with clear plastics such as acrylics and polycarbonates.
  • For permanently laminating / joining dissimilar materials such as plastic to metal bonding.
Basis Methyl Methacrylate (MMA)
Colour After Curing Transparent, Colourless
Density of the Mixture 1.2 g/cm³
Mixing Ratio 1:1
Viscosity of the Mixture 5,000 – 8,000 mPa·s
Application Procedure Easy-Mix
Composition Viscous
Pot Life (at 20°C) 1-2 Minutes
Handing Strength (35% of Final) 8 Minutes
Capable of Bearing Mechanical Loads
(50% of Final)
120 Minutes
Processing Temperature +10°C to +40°C
Curing Temperature +18°C
Fully Cured (100%) 6 Hours
Adhesive Gap Bridging 0.1mm – 2mm
Temperature Resistance (After Curing) -40°C to +125°C
Shear Strength (According to DIN EN 1465)
Aluminium 8 N/mm²
Sand Blasted Steel 18 N/mm²
Stainless Steel 18 N/mm²
Polycarbonate 7 N/mm²
PMMA 9 N/mm²
ABS 7 N/mm²
Polyamide 6.6 2 N/mm²


SKU SWM000264B01V0001
Model # 10564050
Brand Weicon