Premium Quality Woven Fibreglass Cloth – Plain Weave, 2.77mm x 1000mm, Per Metre

SKU: SWM000178B01V0001
Availability: Ships in 1-2 W/Days


All Bulk Prices Below Are Quoted Including GST.
Buy 5 - 14 and pay only $84.46 each
Buy 15 or above and pay only $81.32 each
  • High temperature heat insulation cloth that withstands up to 540°C (1,000°F).
  • Excellent physical strength, resistance to abrasion and most chemicals.
  • Manufactured in the USA and able to be used in a variety of applications.
  • 2.77mm thick. Available by the lineal metre (1 metre wide).

Our Premium Quality Woven Fibreglass Cloth is designed for high temperature insulation. This cloth will withstand temperatures up to 540°C (1,000°F) and has exceptional physical strength.

This particular grade of fibreglass cloth is 2.77mm (0.109”) thick and has a loom stage finish). It is made in the USA utilising a plain weave method and has a loom stage finish.

These cloths are widely used for all kinds of heat protection and insulation applications. Typical examples include:

  • Welding blankets and curtains.
  • Insulation pads.
  • Oil waste retaining.
  • Pump covers.
  • Wrapping of pipes, cables and hoses.
  • Exhaust lagging.

Produced from pure fibreglass yarns, these high-performance insulation fabrics also offer very good resistance to sunlight, aging and solvents. They have excellent chemical resistance except for hydrofluoric and hot phosphoric acid and wet hydrogen chloride.

Fibreglass is known for its physical strength and these cloths utilise that. They have excellent resistance to abrasion and very good strength in both the warp (lengthwise along the roll) and weft/fill (across the roll) directions. More information on these strength characteristics is located on the specifics tab or on our technical data sheet for this cloth.

Base Fabric Fibreglass
Weave Style Plain
Finish Loom State
Colour White
Fabric Weight (Average) 2,380 gm/m² (70 oz. / square yard) (± 10%)
Fabric Thickness 2.7mm (0.109") (± 5.0 mils)
Warp Strength 227 kg / 25.4mm (500 lbs/in.)
Fill Strength 136 kg / 25.4mm (300 lbs/in.)
Abrasion Resistance Excellent
Temperature Tolerance 540°C (1,000°F)
Chemical Resistance Excellent (except for Hydrofluoric & hot phosphoric acid & wet hydrogen chloride)
Solvent Resistance Excellent
Sunlight & Ageing Resistance Excellent
Electrical Properties High Dielectric Strength and Low Constants
Roll Width 1000mm (40")
Full Roll Length 45.7 Metres (50 Yards)


SKU SWM000178B01V0001
Brand Amatex